| This is for a pair of titanium MTB return springs These fit most major system including Avid and Tektro. 3.5 grams for the pair. |
| MTB Titanium Brake Return Springs |
$7.00
$8.00
| Titanium Brake Post Stud Pair |
| Titanium Dome Washer Pair |
$3.90
$9.00
| 4 Titanium V Brake Cup Washers |
$350.00
| KCNC VB6 Red |
| KCNC VB6 Gold |
| KCNC VB6 Blue |
| KCNC VB6 Silver |
| KCNC CB1 Road Brake Caliper Set |
$250.00
| This is for a KCNC CB1 road brake set. Comes new in the packaging box, the pads on these are Green and the extra sets are brown. 164g for both calipers. New in display box. Front and Rear and includer pads and aluminum recessed brake nuts. •Fully CNC'd from 7075 T7 aircraft grade aluminium •Dual pivot calipers •Ti hardwear, Al mounting nuts in two sizes •Complete with triple compound pads for alloy rims and additional pads for carbon rims •Lightweight and compact, yet braking power is strong |
| Red KCNC CB1 |
| This item only ships to the USA and Canada |
| Anodized Road Bike Caliper Cartridge Brake Shoes For use with: Shimano - Dura Ace |
$11.00
| Bolt diameter fits 6.5mm bracket Aluminum brake pad bracket w/ hollow trim to reduce weight. Brake pad length 53mm Bracket anodized finish. For Shimano Pads. Weights 35 grams/pair. Includes stainless steel hardware. The upgraded titanium hardware kit is in the store, on the hardware page under Shimano Dura-Ace titanium kit. Sold as a pair for one wheel only. |
| Gold Brake Shoes |
| Orange Brake Shoes |
| Green Brake Shoes |
| Blue Brake Shoes |
| Updated Red Version |
| The red version is updated. It basically the same but is about 1g lighter |
| Purple Brake Shoes |
| Dual tension adjusters. wheel interchange the pads Straddle cable and carrier are included Item Specifications Brake Type Linear Pull - Cantilever Brake Lever Actuation Short Pull Weight 121 g Brake Usage F/R Front,Rear Pad = Cartridge One set (Enough for ONE wheel). |
| Tektro CR720 Cantilever Brake System - Black |
$25.00
| MTB V-Brake / Cantilever Brake Booster |
$14.00
| For bikes w/ v-brake or cantilever. Made of 6061 T6 aluminum alloy Stiffen seat stay or fork boss improving brake performance. Rigid design. Accepts fat tires Stainless hardware included 79g Booster only. There are 2 set screws for alignment, after mounting these can be removed to reduce weight. |
| Red Booster |
| Gold Booster |
| Purple Booster |
| Green Booster |
| Blue Booster |
| Titanium Brake Lever Adjustment Bolt (M10) |
| This is for a replacement titanium brake cable adjuster for many cnc type brake levers. Paul and vintage systems use this type bolt. Uses M10 Threads, 1.0 pitch. 7.5 grams. |
| $10.00 |
| Black Titanium V Brake Washer Pair |
| Black Titanium V Brake Nut Pair |
$6.00
| This is for a pair of Black titanium V-brake nuts. Used on MTB braks setups |
| M7 Titanium Brake/Cable Adjuster |
| This is for a replacement titanium cable adjuster for most precision billet and many cnc type brake levers. Uses M7 Threads. 7.5 grams. |
| $9.00 |
| M6 Titanium Brake/Cable Adjuster |
| This is for a replacement titanium cable adjuster for many cnc type brake levers. Knurled exterior for easy adjusting Uses M6 Threads. 7 grams. |
| $9.00 |
This is for a Titanium brake pad set nut and bolt for Campy Chorus Cailpers. 7 grams for the set Please Note: these have a 7.9mm shaft diameter and will not fit in some Veloce arms |
$13.00
| Campagnolo Chorus Titanium Pad Nut & Bolt Set |
| Shimano Dura-Ace Titanium Pad Bolt with Fixing Bolt Set |
| 25mm Titanium Recessed Nut |
$6.00
| 32mm Titanium Recessed Nut |
$6.80
| This is for one Titanium Recessed Brake Nut. Can be easily be filed down to fit. |
| Titanium Recessed Brake Nuts |
| 17mm Titanium Recessed Nut |
$5.00
| Measurement on these is total length. Shaft Outside diameter is 8mm Lip height is 3.3mm, 6mm threads. These use a 5mm allen key. |
| 45mm Titanium Recessed Nut |
$7.25
| 35mm Titanium Recessed Nut |
$7.00
| 40mm Titanium Recessed Nut |
$7.15
| 28.5mm Titanium Recessed Nut |
$6.40
| 23.5mm Titanium Recessed Nut |
$5.60
| 20mm Titanium Recessed Nut |
$5.00
| This is for one Aluminum Recessed Brake Nut. Used on carbon fiber forks. I do not know all forks these will fit, Longer nuts can easily be filed down to fit. The measurement is the total length. These use a 5mm allen key. Black anodize is now available below. |
| Aluminum Recessed Brake Nut |
| 13mm Aluminum Recessed Brake Nut |
$3.00
| 18.5mm Aluminum Recessed Brake Nut |
$3.25
| 23mm Aluminum Recessed Brake Nut |
$3.50
| 28.5mm Aluminum Recessed Brake Nut |
$3.75
| 13.5mm Aluminum Recessed Brake Nut |
$3.00
| 17mm Aluminum Recessed Brake Nut |
$3.25
| 31.5mm Aluminum Recessed Brake Nut |
$3.75
| 45mm Aluminum Recessed Brake Nut |
$4.25
| 35mm Aluminum Recessed Brake Nut |
$3.75
| These fit Shimano XTR and XT and all major systems. Enough to do one wheel |
| MTB V-Type Type 72mm Cartridge brake shoes set aluminum-Pad Holder Ava. in: Cammoflague, White Marble, Skeleton Silver |
$8.50
$4.00
| This is for a new 55mm Cartridge Brake Shoe Set for use with Campagnolo Record, Chorus, and Centaur 10. This is an aluminum pad holder, Stainless hardware (The 2 thick washers are aluminum). 42 Grams for the set. This is for a Pair of shoes. Enough to do one wheel. #AR60C |
| Cartridge Brake Shoe Set: Campagnolo Record/Chorus |
$10.00
#AR60C
$5.00
| Brake Shoes For Carbon Fiber Rims |
| This is for a new pair of Brake shoes for use with Carbon rims. This is for a Pair of shoes. Enough to do one wheel. |
| Campy record / Chorus / Centaur |
| Shimano 105/ Ultegra/ Dura-Ace Br-5500/6500/7700 |
$5.00
| Brake Shoes For Ceramic Rims |
| This is for a new pair of Brake shoes for use with Ceramic rims. This is for a Pair of shoes. Enough to do one wheel. |
| Campy record / Chorus / Centaur |
| Shimano 105/ Ultegra/ Dura-Ace Br-5500/6500/7700 |
| MTB V-Type / XTR / XT |
| This is for a new 72mm Cartridge Brake Shoe Set for use with all major Systems. This is an aluminum pad holder wrapped with Carbon, Stainless hardware (The thick washers are aluminum). This is for a Pair of shoes. Enough to do one wheel. |
| Ashima Carbon Fiber Cartridge Brake Shoe Set : MTB |
$15.00
| Ashima AP-65CVB |
$15.00
| Ashima AP-45CVB |
| The Ashima AP-45CVB is the same as in photo and description but have the standard 4 grove brake pad surface |
| This is for a new 72mm Cartridge Brake Shoe Set for use with all major systems (Shimano type shoes) This is an aluminum pad holder, Stainless hardware (The thick washers are aluminum). 45 Grams for the set. This is for a Pair of shoes. Enough to do one wheel. |
| Ashima Skeleton Cartridge Brake Shoe Set : MTB |
#AP64CVU
$16.00
| Ashima AP-64CVU (Black) |
| White Marble |
| Cammoflague |
| Skeleton Silver |
| Titanium Dura-Ace Pad Fixing Set Screw Pair |
| This is for a titanium brake pad fixing bolt set for Shimano Dura-Ace. These fit Shimano Ultegra and Dura-Ace systems BR-7800 1g for everything shown in the photo |
| Black Titanium Dura-Ace Pad Fixing Set Screw Pair |
$5.00
| Titanium Brake Post Stud Pair |
$14.50
| M10 - 1.0 Pitch |
| M10 - 1.25 Pitch |
| M8 - 1.25 Pitch |
| MTB Titanium V-Brake Kit |
$27.00
| This is for a MTB V-brake kit. This will fit all standard V-brake systems including Avid, Tektro, Shimano.... You Get: 2 Brake post Studs, 2 Nuts, 2 Dome washers, 2 m3x10mm spring bolts, 2 m6x12.5 mount bolts, 1 m6x10 cable bolt (Not shown), 4 Aluminum cup washers. Enough for one wheel. 21.5 grams for the set. |
| Please Note: This kit comes with 2 washers only, some systems require 4. |
$3.50
| A2z Brake Boss Plugs with Cable Hanger |
| This is for an A2z Brake Boss Plug par with cable Hanger. These have m10 or M8 studs. Anodized Black |
| M8 Studs |
| M10 - 1.25 Pitch |
| This is for a pair of kcnc brake boss plugs. Fits unused V brake mounting holes on a fork/frame. 3g for the set. Please measure your studs or holes to make sure they are the correct size and thread pitch. I cannot really determine based on frame model or fork. 2 sizes are available: M8 x1.50 pitch M10 x 1.25 pitch |
| KCNC Brake Boss Plug Bolt Pair |
$8.00
| Gold M8 |
| Silver M8 |
| Red M8 |
| Blue M10 |
| Gold M10 |
| Black M8 |
| Silver Brake Shoes |
| Black Brake Shoes |
$6.00
| Titanium Cantilever Brake Bolt Pair |
| These are the bolts that hold the arms to the frame. Sold as a pair, these do not come with the washers that the bolt seats to. The longer length ones are for use with booster plates (which add thickness in front of the arm). |
| 6mm x 20mm |
| 6mm x 15mm |
$6.50
| Tektro R539 Brake Caliper - Road Bikes |
$36.00
| Brake Lever Actuation is short pull Road Caliper - Reach = 47-57mm. The R539 has improved leverage ratio. Forged Aluminum Arms. Tektro has increased the width of opening as well as a safety lock. These use standard Shimano compatible road pads and holders 158 Grams for one Caliper. Please Note the price on these is for ONE caliper and NOT for a pair. USA and Canada ONLY on this item! |
| Tektro R539 Black |
| Black Shimano Dura-Ace Titanium Pad Bolt with Fixing Bolt Set |
| 17.00 |
| This is for a titanium brake pad set for Shimano Dura-Ace. Includes Ti pad fixing bolts. Nuts are raw titanium now. These fit Shimano Ultegra and Dura-Ace systems BR-7800 5g for everything shown in the photo |
| Aluminum Dura-Ace Pad Fixing Set Screw Pair |
| This is for an Aluminum brake pad fixing bolt set for Shimano Dura-Ace. These fit Shimano Ultegra and Dura-Ace systems BR-7800. These are the little bolts that lock the pads into place. 0.6g for the pair of aluminum bolts |
$3.50
| Red Set Screws |
| Black Set Screws |
| Gold Set Screws |
| Blue Set Screws |
| Add Black Anodizing for .50 Each Nut |
$.50
$3.50
| A2z Brake Boss Plugs with Cable Hanger |
| This is for an A2z Brake Boss Plug par with cable Hanger. These have m10 studs. Anodized Black |
| 1.25 Pitch |
| 1.0 Pitch |
| Black titanium brake pad fixing bolt set for Shimano Dura-Ace. These fit Shimano Ultegra and Dura-Ace brake systems BR-7800 1g for everything shown in the photo |
$12.00
| 4 Aluminum V-Brake Cup Washers |
| This replaces the 4 cup washers found on most v-brake systems |
$5.00
| Red Aluminum Washers |
| Black Aluminum Washers |
| Gold Aluminum Washers |
| Blue Aluminum Washers |
| Tektro R580 Brake Caliper - Road Bikes |
$36.00
| Brake Lever Actuation is short pull Road Caliper - Reach = 39-49mm. The R580 has improved leverage ratio. Forged Aluminum Arms. Tektro has increased the width of opening as well as a safety lock. These use standard Shimano compatible road pads and holders 155 Grams for one Caliper. Please Note the price on these is for ONE caliper and NOT for a pair. USA and Canada ONLY on this item! |
| Tektro R580 Black |
| Tektro R539 Silver |
| Tektro R580 Silver |
| Tektro R559 Brake Caliper - Road Bikes |
$36.00
| Road Caliper Exra Long Reach = 55-73mm. The R559 has improved leverage ratio. Forged Aluminum Arms. Tektro has increased the width of opening as well as a safety lock. These use standard Shimano compatible road pads and holders 158 Grams for one Caliper. Please Note the price on these is for ONE caliper and NOT for a pair. USA and Canada ONLY on this item! |
| Tektro R559 Black |
| Tektro R559 Silver |
| AEST Red Brake Set |
| This is for an AEST brake set. Comes new in packaging box The AEST brakeset weighs 266g complete. One of the lightest brake sets in the world at a much lowest cost. Fully cnc'd from 6061 Al alloy 106mm arms, sand blasted, black anodised Hard Anodized 7075 AL alloy mounting Hardware : M8 & M10 Frame/fork pivots and bolts provided. White brake cartridge holders. |
| AEST Gold Brake Set |
| AEST Blue Brake Set |
| AEST MTB Linear Pull Brake Set - 266g |
$100.00
| These are available in rear set only for $55.00 |
| Anodized MTB Cartridge Brake Shoes For use with: MTB |
| For all types of bikes with threaded post type v-brakes or cyclocross brakes Aluminum hollow brake bracket to reduce weight Anodized finish Synthetic rubber insert brake pads Brake pad inserts length 72mm Weights 53 grams/pair |
| Gold Brake Shoes |
| Silver Brake Shoes |
| Black/Silver Brake Shoes |
$12.00
| M6 Precision Billet Aluminum Cable Adjuster |
| This is for a replacement titanium cable adjuster for most precision billet and many cnc type brake levers. Uses M6 Threads. The type 1 derailleur we sell uses 7mm threading. |
| $6.00 |
| M6 Red Adjusting Bolt |
| M6 Black Adjusting Bolt |
| M6 Blue Adjusting Bolt |
| M6 Gold Adjusting Bolt |
| M6 Purple Adjusting Bolt |
| M6 Silver Adjusting Bolt |
| M6 Pink Adjusting Bolt |
| M7 Precision Billet Aluminum Cable Adjuster |
| This is for a replacement titanium cable adjuster for most precision billet and many cnc type brake levers. Uses M6 Threads. The type 1 derailleur we sell uses 7mm threading. |
| $6.00 |
| M7 Red Adjusting Bolt |
| M7 Black Adjusting Bolt |
| M7 Blue Adjusting Bolt |
| M7 Gold Adjusting Bolt |
| M7 Purple Adjusting Bolt |
| M7 Silver Adjusting Bolt |
| M7 Pink Adjusting Bolt |
| One Side Only - AEST Red Brake Set |
| One Side Only - AEST Gold Brake Set |
| One Side Only - AEST Blue Brake Set |
| AEST CNC Brakes, Titanium Post Studs, Aluminum V-Brakes |
| Ti Dura-Ace Rear Center Pivot Bolt (Long) |
$9.50
| This has 2 step threads, 7mm and 6mm. Longer version whick is used for front forks and brakes These fit Shimano Ultegra and Dura-Ace systems BR-7800 |
| Titanium Dura-Ace Rear Center Pivot Bolt (Short) |
$8.50
| This has 2 step threads, 7mm and 6mm. Total length= 36mm These fit Shimano Ultegra and Dura-Ace systems BR-7800 |
$16.00
| This is for a titanium brake pad set for Shimano Dura-Ace. Includes Ti pad fixing bolts. These fit Shimano Ultegra and Dura-Ace systems BR-7800 5g for everything shown in the photo |
| Shimano Dura-Ace Titanium Pad Bolt Set |
$6.00
| This is for just the 2 larger titanium pad fixing bolts shown in the kit above. |
| Ti Dura-Ace Side Pivot Bolt |
$5.00
| Side Pivot Bolt for Dura Ave. 6mm bolt. Anodizing is for photo purposes. This will be raw titanium These fit Shimano Ultegra and Dura-Ace systems BR-7800 |
| 50mm Titanium Recessed Nut |
$7.25
| Weight: M10 Aluminum = 7.7g M10 Titanium = 11g |
| This is for a pair of far and Near brake boss plugs. Fits unused V brake mounting holes on a fork/frame. 3g for the set. Torx Socket. Low profile head Please measure your studs or holes to make sure they are the correct size and thread pitch. I cannot really determine based on frame model or fork. M10 x 1.0 pitch - Fine threading |
| Far and Near Brake Boss Plug Bolt Pair - M10 |
$6.00
| Blue M10 |
| Gold M10 |
| Red M10 |
| Black M10 |
| AEST Road Brake Caliper Set "C Brakes" - YRCB-01 |
$130.00
| This is for an AEST road brake set. Comes new in the packaging box. 280g for both calipers. Front and Rear and includes pads and recessed brake nuts for mounting. •Fully CNC'd from 6061 T6 aircraft grade aluminium. Anodized finish •Dual pivot calipers Arms are 39-51mm Bolts are 28.5mm and 16.8mm Will fit all standard road bikes. |
| Black AEST YRCB-10 |
| This item only ships to the USA and Canada |
| Red AEST YRCB-10 |
$5.50
| Titanium V Brake Nut Pair |
| Photo shows black but is for raw titanium nuts |
$4.00
| This is for a pair of Black titanium V-brake washers. Used on MTB brake setups |
| Black Booster |
| Orange Booster |
| Silver Booster |
| Shimano Dura-Ace Titanium Mini Bolt Set |
$4.00
| This is for just the 2 smaller titanium locking bolts shown in the kit above. |
| 40mm Aluminum Recessed Brake Nut |
$4.00
| Dimensions: The length posted above is the total of the entire nut. Shaft Outside diameter is 8mm, lip height is 3.3mm, 6mm threads. These use a 5mm allen key. |
| M10 - 1.50 Pitch |
| KCNC VB6 Linear Pull Brake Set with Levers - 312g |
| This is for a KCNC V6 brake set. Comes new in the packaging box, the pads on these are tri-color. The VB6 is the same basic version of the VB1 brakeset. The VB1 is machined from 6061 alloy instead of 7075. The VB1 brakeset weighs 244g complete, The VB6 weigh 312g. One of the lightest brake sets in the world at a much lower cost. Brake Arms: Fully cnc'd from 6061 Al alloy 105mm arms, sand blasted, black anodised Linear titanium wire springs Hard Anodized 7075 AL alloy mounting Hardware : M8 & M10 Frame/fork pivots and bolts provided. Brake cartridge holders with gold anodized scandium nut & bolts Replaceable triple compound brake cartridge pads Brake pad spacers (2, 3, 4mm) to give optimum brake pad alignment Weight : 123g including brake cartridges and noodle Levers: Fully cnc'd from 6061 Al alloy 92mm leverage, dual finger design single clamp/lever bolt, M10 gold anodised silver anodised alloy cable adjuster red anodised alloy reach adjuster sand blasted black anodised lever and clamp Weight : 33g each Weight, Complete Set 312 grams Weight, Calipers 123 grams Weight, Lever Set 66 grams Vertical Pad Reach 15-40 mm |
| This item only ships to the USA and Canada |
| Please refresh browsers (F5 Key) as I update this website daily |
| Shipping Information Please check out FAQ page or Blog for shipping rates and information. |
| Please Note that Tracking From Canada is Costly and Extra Charges Apply |
| All Prices are in US Dollar $5.00 Shipping via Air Mail. Overseas is $10.00 Tracking is extra Costs! |
| 55mm Titanium Recessed Nut |
$7.45
| 60mm Titanium Recessed Nut |
$7.50
| 50mm Aluminum Recessed Brake Nut |
$4.50
|
| Add Tracking to your Order: Canada = 8.00 USA = 12.00 International = 40.00 |
| Please note that a tracking number is extra cost and is very expensive overseas. Some orders take extra time so please be patient if a delay occurs. Please check our FAQ page if you have a question |
| The Touring Canti is a powerful cantilever brake with a similar design to the Neo-Retro, but with the arms angled upward. This gives the brake a much narrower profile without significantly reducing stopping power. The narrower profile of the Touring Canti can be desirable if you're riding with large panniers or if your current brakes don't give you enough heel or calf clearance.The arms of the Touring Canti are machined from lightweight 6061 aluminum. A T- shaped cross section prevents the brake from flexing too much. The brake pads mount to slots in the arms that allow for vertical positioning. The toe-in and angle can be fine tuned . Like all of Paul Components' brakes, the Touring Canti has a sealed pivot mechanism. Rubber seals and a stainless steel bushing keep the brake arms turning smoothly no matter what you're riding through. The spring tension can be adjusted in both pivots to center the brake and to adjust the strength of the return swing. Material 6061 Aluminum Weight 99g Finish Anodized or Polished Anodized Color Black or Silver Cable Pull Short Pull↓ Brake Pads Salmon Kool Stop Thinline |
| Paul Components- Touring Cantilever |
$110.00
| Black Touring Cantilever |
| Silver Touring Cantilever |
| The MiniMoto is our mini-v brake for use with standard short pull brake levers. We absolutely love it, as does anyone who’s ever ridden one. The MiniMoto is a direct pull cantilever brake. This design is simpler to install than a traditional cantilever brake, and gives the MiniMoto a narrow profile. The arms of the MiniMoto have been shortened to match the leverage of standard road brake levers, making the MiniMoto compatible with drop bar brake levers with integrated shifters. The short curved arms give plenty of clearance for cyclocross tires or wide fenders. The spring tension is independently adjustable for each arm which means the brake can be precisely centered on the wheel and adjusted for return strength. The cable enters the brake through a barrel adjuster at the top of the curved cable noodle. This adjuster makes it quick and painless to fine-tune the cable tension of the brake without tools. Like all Paul Component brakes, the MiniMoto has sealed stainless steel bushings in the pivots. These precisely machined bushings are what contact the brake posts of the frame and give the brake arms a smooth surface to pivot on. Material 6061 Aluminum Weight 149g Finish Anodized or Polished Anodized Color Black or Silver Cable Pull Short Pull↓ Brake Pads Salmon Kool Stop Thinline |
| Paul Components- MiniMoto |
$130.00
| Black MiniMoto |
| Silver MiniMoto |
| For those people still running v/linear/direct pull brakes, we offer the Motolite. This brake has proven itself to be the best of this genre time and time again: it’s high-powered, has excellent modulation and is easy to adjust/maintain. The Motolite, Paul Components' flagship linear pull brake, has been around the block a time or two. Paul considers the design is so near to perfect that there is no foreseeable reason to ever change it. First introduced in 1990, Paul's brake pivot mechanism has an excellent track record. A stainless steel bushing mates the brake to the frame's brake posts and provides a larger bearing surface with a tightly controlled tolerance.The brake arms are precision ground and then CNC machined into a light weight, but more importantly strong and reliable form. A brake collar fits around each cylindrical arms and holds the Kool-Stop brake pads in place, while allowing them to be finely tuned for height and toe-in. These pivots are pre-greased for smooth action and sealed to keep them that way. Specially wound square springs offer a snappy return and are easily adjusted and balanced. The quick- release mechanism is simple but reliable, allowing you to easily open up the brake when you need to, but never rattling open on its own. The cable enters the brake through a curved noodle with a Teflon lining for reduced friction. Thanks to the switchable brake arms the cable can be routed into the brake from the left or right Material 6061 Aluminum Weight 137g Finish Anodized Anodized Color Black or Silver Cable Pull Long Pull↓ Brake Pads Salmon Kool Stop Thinline |
| Paul Components- Motolite |
$140.00
| Black Motolite |
| Silver Motolite |
| BMX - 5/16" |
| Titanium V-Brake - Post Studs and Nuts |
| $12.50 |
| Titanium V-Brake Post Studs and Nuts will fit all standard v-brake systems including Avid. Uses m6 threads. 25.5mm long. 9 Grams Fits most V brake & Road bike brakes on the market: Avid, Shimano, Sram, Campagnolo Please check your studs to make sure they are the same visually. |
| Titanium Brake Post Stud Pair Hollow 8mm and 6mm (Late 90's Cannondale) |
$15.00
| M8 - 1.25 Pitch |
| These titanium studs are special production. The 8mm is standard but hollow in the center to save weight. The 6mm is an oddball and is for late model cannondale |
| M6-Cannondale |
| Aluminum Brake Post Stud Pair |
| M8 x 1.25 Pitch |
| $8.00 |
| M10 x 1.0Pitch |
| M10 x 1.25Pitch |
| M10 x 1.5Pitch |
| M8 x 1.0 Pitch |
| Weight: M10 Aluminum = 7.7g M10 Titanium = 11g |
| Raw Nuts & Studs |
| Black Nuts & Studs |
| ---March 29th, 2020 Update--- I decided to put the store on vacation today. As we all know recent events have placed a strain on everything including the postal system. I have been dealing with late packages and some returns. Too bad because this is a busy time. I'll watch to see how things go and will keep everyone posted. All orders placed up to this date will still be processed but please dont place orders. Paypal fees are not refundable. Talk soon, Tom |