Please refresh browsers (F5 Key) as I update this website daily |
Shipping Information Please check out FAQ page or Blog for shipping rates and information. |
Please Note that Tracking From Canada is Costly and Extra Charges Apply |
All Prices are in US Dollar $5.00 Shipping via Air Mail. Overseas is $10.00 Tracking is extra Costs! |
|
Red Titanium Bolts |
We have been working with a company on a patented process to produce red titanium. We now have a few items with further stock to come soon. This process cannot be done outside of production and is more expensive. To date red titanium has not been possible. The cost is a bit higher due to the process. The finish is as durable as black PVD processing. Deep Red. |
$3.00 |
5x10 Disc Brake Rotor Bolt |
Red Titanium Bolts are produced by a special process that was recently developed. Prior to this Red titanium wasn't possible. The coating is the same as black titanium and is durable and stable. Due to patent restriction I cannot discuss this process. Also only items done in mass production can be made red as the cost is very high to make. - This is NOT paint or Powdercoat - It's Vacuum Deposition thru Plasma Induction and is durable. This coating and color is very nice and will not chip fade or peel. The Color: Titanium bolts are very difficult to get good photos. The main photo above is a lighter red and has been enhanced. These red titanium bolts are a deeper color like the photo below. Cherry (Bright red) Is not possible. |
Red Titanium Bolts, Red Titanium Fasteners |
Shallow Head Red Titanium Bolt |
Head Diameter = 10.5mm / 4mm socket (6mm version) Price is for a single bolt only. |
|
Taper Head Red Titanium Bolts |
|
|
|
Non Taper Head Red Titanium Bolts |
|
|
|
|
Countersunk Red Titanium Bolts |
|
This red bolt has a narrower head than standard bolts. This will work in applications such as stems and some levers. Some stems use a smaller head diameter and a standard bolt won`t fit. Head Diameter = 7.5mm (Standard is 8.5mm) 4mm Hex Socket, 5mm bolt. Washers are installed. |
RED M5 Titanium Narrow Head Bolts With Washers - Stems |
M5x17 Narrow Head (Stems) |
M5x20 Narrow Head (Stems) |
This red bolt has a narrower head than standard bolts. This will work in applications such as stems and some levers. Some stems use a smaller head diameter and a standard bolt won`t fit. Head Diameter = 7.5mm (Standard is 8.5mm) 4mm Hex Socket, 5mm bolt. These bolts have no washer |
RED M5 Titanium Narrow Head Bolts - Stems |
M5x20 Narrow Head (Stems) |
M5x17.5 Narrow Head (Stems) |
M5x15 Narrow Head (Stems) |
M5x15 Narrow Head (Stems) |
Green Spindles |
Red Titanium Pedal Spindles For Speedplay Pedals Zero X1 X2 & Light Action |
$35.00 |
Aftermarket Replacement Titanium spindle set for SpeedPlay. Zero, X1 and X2 The end bolt is also posted and will be a separate purchase. Please check the measurements to ensure you are ordering the proper axle: Overall Length = 78.5mm 6mm end bearing race / 5mm threaded end. Left I added a photo of a used set we were upgrading. Spins nicely. Uses a 8mm allen and 15mm wrench to tighten. 200lb weight limit. 57 grams for the pair. |
Silver Spindles |
Gold Spindles |
Blue Spindles |
Lavender Spindles |
Black Spindles |
New Red Spindles! |
|
M5x10mm Titanium Torx Disc Brake Rotor Bolts |
M5x10mm titanium torx bolts for front disc brake rotors. Uses a t25 socket. |
Raw Torx |
Gold Torx |
Black Torx |
Green Torx |
M5x12.5mm Titanium Torx Disc Brake Rotor Bolts |
M5x10mm titanium torx bolts for front disc brake rotors. Uses a t25 socket. |
Raw Torx |
Green Torx |
M5x15mm Titanium Torx Disc Brake Rotor Bolts |
M5x10mm titanium torx bolts for front disc brake rotors. Uses a t25 socket. |
Raw Torx |
Gold Torx |
Blue Torx |
Green Torx |
Lavender Torx |
Blue Torx |
Gold Torx |
Lavender Torx |
Red Torx |
Black Torx |
RED Torx |
Blue Torx |
RED Torx |
Red Bolt Pair |
Natural Bolt Pair |
$5.00 |
This is a titanium water bolt pair with washers. m5x15mm |
Titanium Water Bottle Bolt Pair with Washers |
Black Bolt Pair |
Campagnolo Shift Lever Clamp Titanium Nut & Bolt |
This is for a replacement titanium nut and bolt for Campagnolo shift lever clamps. Does not include the clamp. 7.5g for the nut and bolt. The nut uses a TORX socket |
New Item! |
Raw Titanium |
New! Red Titanium |
---March 29th, 2020 Update--- I decided to put the store on vacation today. As we all know recent events have placed a strain on everything including the postal system. I have been dealing with late packages and some returns. Too bad because this is a busy time. I'll watch to see how things go and will keep everyone posted. All orders placed up to this date will still be processed but please dont place orders. Paypal fees are not refundable. Talk soon, Tom |